Mijia Omni Robot Vacuum Mop 1S and Self Cleaning Robot Vacuum Mop 2 Pro Automatic Up and Down Water Device Accessories Robot
SPECIFICATIONS
Brand Name: XIAOMI
Function: Dry
Origin: Mainland China
Power (W): <500w
Voltage (V): 14.4V
Certification: ce
Battery Type: others
Water inlet pressure range:: 0.14-1MPa
Rated voltage:: 12V
XIAOMI MIJIA Omni Robot Vacuum Cleaners Mop 1S and Self Cleaning Robot Vacuum Mop 2 Pro Automatic up and down water device
No need to change the water manually, completely free your hands
Compatible product: XIAOMI MIJIA Omni Robot Vacuum Cleaners Mop 1S and Self Cleaning Robot Vacuum Mop 2 Pro
Automatic water up and down, no need to change the water.
Complete self-cleaning with dust collection station
Automatically inject clean water and automatically remove sewage, without manual participation in the whole process. To achieve fully automatic work
Automatic Celestial Cleaner
Exclusive cleaners can be purchased separately, and the dust collection station will automatically add the right amount of cleaner each time you use it.
It is more convenient than manual operation, and effectively reduces the problems of air bubbles and odors generated when mopping the floor.redway
Please confirm the installation environment before use
1. A height of more than 28cm needs to be reserved above the base.
2. The water pressure of the tap water source is 0.14-1MPa
3. Floor drain/wall outlet height≤40CM
4. Power socket (will not be exposed to water)
Installation display
Optionally installed on the balcony
Optionally installed in the toilet (dry area)
Optionally installed at the bottom of the cabinet
Can be installed in the living room
Optionally installed in the kitchen
You can refer to the installation plan
Option 1 Reserve buried water pipes in the wall
1. Power socket
2. Water inlet
3. Angle valve
4. Water outlet (diameter 25mm)
5. Floor drain (sewage outlet)
note:
1. It is recommended that the height of the water inlet from the ground (d1) is about 35-40cm. If the terminal of the sewage pipe is a floor drain, there is no special drainage size requirement. If the terminal of the sewage pipe is a wall outlet, the recommended height (d2) of the water outlet from the ground is less than 30cm (recommended height is 15cm);
2. The pre-embedded pipe needs to be installed with a separate angle valve to control the water inlet;
3. The recommended water inlet pressure is ordinary municipal water pressure (0.14MPa~1MPa).
Option 2 wall opening
1. The location of the opening on the wall must meet the basic requirements for installation (with water source and drainage, such as balcony, bathroom, kitchen, etc.);
2. It is recommended that the height (d3) from the center of the hole on the wall to the ground should not be higher than 15cm, so as not to affect the appearance, and the diameter of the hole should be 3cm.
Packing list of automatic water supply and discharge device
Up and down water module *1
Three-point right angle elbow *2
Two-point right angle elbow *2
Three-point lock plate *6
Two-point lock piece *9
Water pipe fixing clip *1
Clean water adapter *1
Sewage adapter *1
Control box *1
Cable tie *1
Clear water three-way valve *1
Three-point sewage pipe *1
Two-point clean water pipe *1
Covered wire tube *1
Cable management clip *1
Manual *1
